Emulsifier Melting Tank

We designed and #manufactured a purpose-built emulsifier melting tank for one of our long-term clients.

The requirements for the tank were extremely specific and also needed to fit in a location with limited space yet needed easy access for manual loading of the #emulsifier blocks into the tank.

The tank has a melting grid that circulates water at 85 degrees to melt the emulsifier blocks along with a heating jacket that holds water at 60 degrees to assist with temperature control. An agitating system is installed in the tank to further assist with temperature distribution and control and to keep the emulsion stable.

This was an interesting design process, as we had to ensure that we achieved a range of requirements and making sure that tank could fit it in the required location. We needed to allow in the design the ability for adequate cleaning and easy maintenance should it be required. The design also included high level, low level, and pressure sensors to enable automatic control of the liquid emulsion into the existing process system.

#australianmade #designandmanufacture #stainlessservices

#stainlesssteeltanks #supportlocal #foodandbeveragemanufacturing

Nuttelex Melt Tank 2